HoopMaster Fixtures for Brother Hoops

HOOPMASTER

FIXTURES FOR BROTHER PR HOOPS

The HoopMaster embroidery system is designed to simplify the hooping process. By integrating HoopMaster fixtures with your Brother PR hoops, you can consistently achieve precise embroidery placement on the HoopMaster stations. These fixtures ensure that your embroidery stabilizer remains securely in place while hooping, enhancing the overall quality of your embroidery.

What are the benefits?

Consistency: Achieve uniform results every time.

Efficiency: Streamline your embroidery process.

Accuracy: Keep stabilizers correctly positioned during the hooping process.

HOOPMASTER

HOOPMASTER FIXTURES FOR BROTHER pr HOOPS

Below you’ll find the range of HoopMaster fixtures specifically designed for Brother PR hoops. Each fixture is engineered to provide you with precise and consistent embroidery placement, making your hooping process smoother than ever.

HoopMaster

60 x 40 mm Brother Hoop Fixture

This Brother hoop fixture is specifically designed for the 60 x 40 mm hoop included with the Brother PR embroidery machine.

Perfect for embroidering small items!

Please note:

This fixture is not compatible with other embroidery machine brands or sizes.
The Brother 60 x 40 mm hoop is NOT INCLUDED when purchasing this fixture.

SHOP NOW

Key features

Mounting the fixture

Easy Installation:

The two pins on the back of this fixture are designed for easy mounting on both the FreeStyle Base and the larger HoopMaster Station. These pins ensure secure placement on either station, providing stability and precision during the hooping process.

Key features

Versatile Positioning

Multiple Placement Options:

Place the pins in the holes on the FreeStyle mounting base to securely lock the fixture in place. The FreeStyle mounting base is prefabricated with two sets of holes, allowing for two different placement positions for the fixture. Similarly, there are multiple mounting positions on the HoopMaster Station.

Key features

Use with Brother 60 x 40 mm hoop

Perfect Fit:

This fixture is specifically designed to securely hold the bottom ring of the Brother 60 x 40 mm hoop in place, ensuring stability and precision during your hooping process.

Key features

Backing material

Stabilizer Clamps:

Place your preferred embroidery stabilizer over the bottom ring in the fixture, and use the black tabs to securely clamp it down. This ensures that the stabilizer remains firmly in place, making it easier to hoop your item.

Key features

Hooping

Accuracy and Precision:

With the bottom ring secured in place and the stabilizer clamped down, you can easily adjust your garment for the perfect embroidery placement. The elevation provided by the FreeStyle Base is especially beneficial when hooping sleeves and other small cylindrical items.

Key features

Mounting the fixture

Easy Installation:

The two pins on the back of this fixture are designed for easy mounting on both the FreeStyle Base and the larger HoopMaster Station. These pins ensure secure placement on either station, providing stability and precision during the hooping process.

Versatile Positioning

Multiple Placement Options:

Place the pins in the holes on the FreeStyle mounting base to securely lock the fixture in place. The FreeStyle mounting base is prefabricated with two sets of holes, allowing for two different placement positions for the fixture. Similarly, there are multiple mounting positions on the HoopMaster Station.

Use with Brother 60 x 40 mm hoop

Perfect Fit:

This fixture is specifically designed to securely hold the bottom ring of the Brother 60 x 40 mm hoop in place, ensuring stability and precision during your hooping process.

Backing material

Stabilizer Clamps:

Place your preferred embroidery stabilizer over the bottom ring in the fixture, and use the black tabs to securely clamp it down. This ensures that the stabilizer remains firmly in place, making it easier to hoop your item.

Hooping

Accuracy and Precision:

With the bottom ring secured in place and the stabilizer clamped down, you can easily adjust your garment for the perfect embroidery placement. The elevation provided by the FreeStyle Base is especially beneficial when hooping sleeves and other small cylindrical items.

60 x 40 mm Bother Fixture on freestyle base

SETUP WITH FREESTYLE BASE

When mounting the 60 x 40 mm Brother Fixture on the FreeStyle base, you instantly create a dedicated hooping area. The Brother 60 x 40 mm bottom ring, along with any backing material, is securely held in place, making the hooping process much easier! This setup is ideal for t-shirt sleeves, cap-backs, and other small items.

60 x 40 mm Bother Fixture on freestyle base

SETUP WITH FREESTYLE BASE

When mounting the 60 x 40 mm Brother Fixture on the FreeStyle base, you instantly create a dedicated hooping area. The Brother 60 x 40 mm bottom ring, along with any backing material, is securely held in place, making the hooping process much easier! This setup is ideal for t-shirt sleeves, cap-backs, and other small items.

60 x 40 mm BROTHER FiXTURE on standard station

SETUP WITH STANDARD STATION

The 60 x 40 mm Brother Fixture can also be mounted on the standard station using the pins on the back and selecting a pair of holes on the station. This setup is ideal for small pocket embroidery and small left chest logos, ensuring consistency when embroidering bulk orders.

60 x 40 mm BROTHER FiXTURE on standard station

SETUP WITH STANDARD STATION

The 60 x 40 mm Brother Fixture can also be mounted on the standard station using the pins on the back and selecting a pair of holes on the station. This setup is ideal for small pocket embroidery and small left chest logos, ensuring consistency when embroidering bulk orders.

HOOPMASTER

180 x 130 mm Brother Hoop Fixture

This Brother hoop fixture is specifically designed for the 180 x 130 mm hoop that comes with the Brother PR embroidery machine.

Please note:

This fixture is not compatible with other embroidery machine brands or sizes.
The Brother 180 x 130 mm hoop is NOT INCLUDED when purchasing this fixture.

SHOP NOW

Key Features

For Brother 180 x 130 mm hoop

This fixture is specifically designed to securely hold the bottom ring of the Brother 180 x 130 mm hoop in place, ensuring stability and precision during your hooping process.

Simple and Versatile Mounting:

The 180 x 130 mm Brother hoop fixture uses thumb screws for easy mounting. There are no nuts to use. Simply thread the thumb screws through the mounting holes on the fixture, and into the holes on the HoopMaster station. With multiple holes available, you have various mounting choices to suit your needs.

Note:

Lost screws can be replaced by purchasing standard 6-32 x 5/8 inch screws at a hardware store.

Stabilizer Clamps

Place your preferred embroidery stabilizer over the bottom ring in the fixture, and use the black tabs to securely clamp it down. With the stabilizer firmly in place, you’re now ready to load your garment and proceed with precision hooping.

Precision hooping

With the bottom ring secured in the fixture and the stabilizer clamped down, you can easily load and hoop your garment on the HoopMaster station. The setup provides stability and precision for your embroidery projects.

Note:

Men's XL t-shirt shown in photo.

180 x 130 mm Brother Fixture on standard HoopMaster station

SETUP WITH HOOPMASTER STANDARD STATION

This setup is ideal for embroidering t-shirts and hoodies with medium, central designs, and ensures placement consistency when embroidering bulk orders.

180 x 130 mm Brother Fixture on standard HoopMaster station

SETUP WITH HOOPMASTER STANDARD STATION

This setup is ideal for embroidering t-shirts and hoodies with medium, central designs, and ensures placement consistency when embroidering bulk orders.

HOOPMASTER

300/360 x 200 mm Brother PR Hoop Fixture

This Brother hoop fixture is designed to work with two hoops:

1.) The 300 x 200 mm hoop included with the purchase of a Brother PR embroidery machine.

2.) The 360 x 200 mm hoop included with the Brother PR 10-needle machine.

The fixture has two halves and puzzle spacers, making it adaptable to both hoop sizes mentioned above.

Please Note:

This fixture cannot be used for any other embroidery machine brands or sizes.
The Brother 300 x 200 mm and 360 x 200 mm hoops are NOT INCLUDED when buying this fixture.

SHOP NOW

Key features

For use with the Brother PR 200 x 300 mm hoop

Designed for Precision:

To fit the Brother PR 300 x 200 mm bottom hoop ring, hook the two halves of the fixture together without the puzzle spacers.

Key features

For use with the Brother PR 360 x 200 mm hoop

Adaptable:

To fit the Brother PR 360 x 200 mm hoop, hook the two halves of the fixture together with the puzzle spacers.

Key features

Mounting the fixture

Simple and Versatile Mounting:

The 300/360 x 200 mm Brother Hoop fixture uses thumb screws for easy mounting, without any nuts. Simply thread the thumb screws through the mounting holes on the fixture and into the holes on the HoopMaster station.

Note:

Lost screws can be replaced by purchasing standard 6-32 x 5/8 inch screws at a hardware store.

Key features

Backing material

Stabilizer Clamps:

When the bottom ring is secured in the fixture, use the black tabs to clamp down on the embroidery stabilizer. This prevents the stabilizer from shifting while loading your garment or the item you want to embroider, ensuring precise and stable hooping.

Key features

Horizontal placement

Versatile mounting:

Multiple mounting holes are available, allowing you to turn the fixture sideways for horizontal hoop placement. This flexibility ensures that you can accommodate various embroidery projects with ease.

Key features

For use with the Brother PR 200 x 300 mm hoop

Designed for Precision:

To fit the Brother PR 300 x 200 mm bottom hoop ring, hook the two halves of the fixture together without the puzzle spacers.

For use with the Brother PR 360 x 200 mm hoop

Adaptable:

To fit the Brother PR 360 x 200 mm hoop, hook the two halves of the fixture together with the puzzle spacers.

Mounting the fixture

Simple and Versatile Mounting:

The 300/360 x 200 mm Brother Hoop fixture uses thumb screws for easy mounting, without any nuts. Simply thread the thumb screws through the mounting holes on the fixture and into the holes on the HoopMaster station.

Note:

Lost screws can be replaced by purchasing standard 6-32 x 5/8 inch screws at a hardware store.

Backing material

Stabilizer Clamps:

When the bottom ring is secured in the fixture, use the black tabs to clamp down on the embroidery stabilizer. This prevents the stabilizer from shifting while loading your garment or the item you want to embroider, ensuring precise and stable hooping.

Horizontal placement

Versatile mounting:

Multiple mounting holes are available, allowing you to turn the fixture sideways for horizontal hoop placement. This flexibility ensures that you can accommodate various embroidery projects with ease.

300/360 x 200 mm BROTHER FiXTURE on standard hoopmaster station

SETUP WITH HOOPMASTER STANDARD STATION

The fixture can expand to accommodate both 300 x 200 mm and 360 x 200 mm Brother PR hoops. When the fixture is turned horizontally, it provides an ideal setup for consistent placements when embroidering large t-shirt or hoodie designs. Mounted in the vertical position with the stabilizer secured, it is perfect for lining up your designs when hooping towels and other large items.

300/360 x 200 mm BROTHER FiXTURE on standard hoopmaster station

SETUP WITH HOOPMASTER STANDARD STATION

The fixture can expand to accommodate both 300 x 200 mm and 360 x 200 mm Brother PR hoops. When the fixture is turned horizontally, it provides an ideal setup for consistent placements when embroidering large t-shirt or hoodie designs. Mounted in the vertical position with the stabilizer secured, it is perfect for lining up your designs when hooping towels and other large items.